ThePlantAide.com

Allen's breeding methods and precautions

Saul Goodman
2020-07-20 08:39:52
Soil: the soil with good drainage and air permeability should be used to raise Allen. Watering: usually once a week, once a half month in summer, water thoroughly. Lighting: to ensure sufficient sunlight, indoor breeding should be properly ventilated. Temperature: the maximum temperature shall not be higher than 35 ℃, and the minimum temperature shall not be lower than 5 ℃.

I. soil

Allen's requirement for soil is not high. In order to grow better, it is best to use soil with good drainage and air permeability.

2. Water

The frequency of watering Allen should be controlled. It does not need to be watered every day. It is watered once a week at ordinary times and once a half month in summer. When watering every time, it is better not to stop watering. It is better to water once. Avoid being caught in the rain for a long time.

III. light

To ensure that there is sufficient sunlight, especially in the peak period of growth, if the sun is too strong in summer, we should shade it, so as not to be burned by the sun, it likes a ventilated environment, if it is cultured indoors, it should be properly ventilated.

Temperature

The highest temperature should not be higher than 35 ℃. If the temperature is too high, it will enter into the dormancy period. The lowest temperature should not be lower than 5 ℃. When the outdoor temperature is relatively low in winter, it will finally be moved to the indoor for maintenance to avoid frostbite.

5. Precautions

Allen is prone to bacterial infection, leaves will appear spots, after the discovery should be sprayed with chlorothalonil control. If you don't use the medicine in time, it may harm more leaves, and even make the leaves fall off constantly. When the disease is serious, it will be difficult to do

Alan

The Plant Aide - Plant experts around you

The Plant Aide - Plant experts around you

www.theplantaide.com