Autumn and winter are the home of Florist Kalanchoe. They can bloom all the way from autumn to the new year, or even to next spring. When they go to buy potted plants, the price will definitely rise. It's not as good as cutting now. It's also excellent to exchange seedlings with flower friends!
1. Use clean scissors to cut the branches of Florist Kalanchoe. In fact, when topping Florist Kalanchoe, the top 3-6cm can be used for cutting. After cutting, put the windowsill to dry the cut for about 1-2 hours.
2. Prepare the soil for cutting, use ordinary coconut brick and coconut bran soil for long cutting life, which is clean and not easy to black rot. You can mix some perlite or other small stones in the soil to improve the air permeability.
3. Use clean yoghurt box or disposable cup cutting, because long life cutting is most likely to encounter black rot problem, and separate small cup cutting will avoid black rot and infection. Remember to poke 3-5 holes at the bottom of the cup to make it permeable.
4. When you are ready, fill the cup with soil, insert the long-lived branches, put them on the tray, water them in turn, and place them where the sun can't reach, and then water the cup when the soil is dry.
5. Observe the growth condition of long life and start to grow leaves, which means that the growth is good. After 2-3 leaves are grown, you can properly bask in the sun. If you have black rot in cutting, you can spray some carbendazim.
6. After cutting for 20-30 days, the root system is very developed, which can be taken out with soil and transplanted into a 1 gallon flower pot.
7. Do not scatter the original soil lump when transplanting. The new soil used is garden soil: coconut bran soil: particles (pearlite and other stones) = 3:2:1. Plant water and fix roots, put them in a place where the light is not so strong, and then bask in the sun in 2-3 days.
8. 1-2 weeks after transplanting, you can put some slow-release fertilizer in the soil, or water huaduo1 once, which can speed up the growth. Some cuttings have flower buds at this time. If you want to let it spread branches, you can first remove the flower buds.
9. By the end of autumn and the beginning of winter, you can add phosphate fertilizer, spray the positive and negative sides of the leaves with potassium dihydrogen phosphate, or water huaduo No. 2 (once a half month), about 1-2 times, so that the longevity can quickly sprout into a big flower ball.~
In addition to the difficulties of living in summer, geranium is well cultivated in spring and autumn. It is the main force of balcony explosion, and it is not too many to raise dozens of pots. Last year, Huahua introduced Huayou "auspicious fruit". Her balcony is almost all Geranium.
Geranium is now basically over the summer, but in the South and the fierce area of the autumn tiger, we still need to pay attention to it. Now hurry to cut more pots, just in case!
1. Because geranium is very easy to cut black rot, the knife used for pruning must be clean, or wipe it with alcohol or multi fungus liquid in advance, and it is best to cut the thicker branch.
After cutting, you can remove the extra leaves and leave a pair of leaves. Let the leaves dry for 2-3 hours first to make the cut slightly tight, and then the cutting is not easy to be stimulated.
2. Prepare the cutting soil. Geranium is suitable for cutting with pure granular soil. Here, deer bog soil and hematite soil are used, as well as vermiculite and perlite. Disposable cup, several holes at the bottom, spare.
3. When cutting, pay attention not to connect the branch to the granular soil, first poke a hole with your finger, then put the branch into the hole, and fill it with particles, without damaging the branch. The cuttings are well watered and permeable, and the tray under the cuttings can flow out with water.
4. In the process of Geranium cutting, as long as you pay attention to sanitation and ventilation, there is basically no problem. Put it in the shade a few days ago. After 3-5 days without any problem, you can move it to the position of astigmatism slightly, and then water the particles in the cup when they are dry.
5. Observe the root system through a transparent cup. When it is 3-5cm long, transplanting can be considered. The soil can be nutritious soil: Perlite = 10:1 ratio, the bottom of the basin should be padded with some ceramsite for ventilation, well planted, well watered, and put in a slow basin in a cool and ventilated place.
6. In the small day after taking the basin, the sun should be properly basked, less watering should be done to avoid excessive growth. When the seedlings grow to 4-5 pairs of leaves, consider topping. Cut them along the red line below. Do not water after cutting, and more branches will be produced if the cut is dry.
7. After topping, the days will slowly spread and grow. You can supplement compound fertilizer once. You can get more sunshine in autumn and winter. It will bloom in about 1-2 months. If you want it to burst into a ball, you can continue to top and promote new branches.
Who doesn't want a sea of colorful hydrangeas? It's a pity that Hydrangea is very expensive. If you buy it all by buying it, it will cost a lot.
However, Hydrangea is a very good cutting flower. Now it's the pruning season. The cut branches are cut through. Next year, you can absolutely fill your home with Hydrangea ~
1. The branches of Hydrangea are very straight. Find a clean scissors and cut the hydrangea into small sections like the following figure. Cut the hydrangea at an angle of 45 °. Each section must have 1-2 nodes (the place with long leaves is called nodes). Only the upper leaves are left, and 1 /3 of the two leaves are left respectively.
Because Hydrangea is easy to be black, it's better to dip the incision with carbendazim powder, or use carbendazim to soak in all the cut branches, and take out the dried water after soaking for 20-30 minutes.
2. Hydrangea is suitable for cutting with pure vermiculite and hematite soil, with high rooting rate (this kind of clean and air permeable soil is very suitable for cutting).
3. Cutting Hydrangea can also use disposable cup, but the most breathable one is non-woven bag. There is a special wholesale cutting bag (non-woven), which is very cheap and has good air permeability. After cutting, it can be placed in the tray and poured with vermiculite.
4. Hydrangea prefers to be shady and cool. The cuttings should be placed in a shady place and kept ventilated. When vermiculite is dry and watered, the root system will soon come out. If it is kept for 3-5 days, transplanting can be considered.
5. When the root system is relatively developed, you can cut the non-woven bag, do not pull out the seedlings, it will damage the root system, and the soil on the root will not be removed, and directly transplant it into a small basin.
Hydrangea is suitable for loose and nutritious soil. Generally, the mixture of nutritious soil particles (perlite, etc.) is OK. After planting, water and root should be poured. Do not sun it in the ventilated place. Change the basin for 3-5 days.
6. After serving in the basin, the old leaves of Hydrangea will turn yellow slowly, which is the normal nutrition consumption. Don't worry, it will dry up and fall off when it is consumed. It can supplement some slow-release fertilizer particles, transfer the flowerpot to a bright position, and promote the emergence of new buds.
7. Now the cuttings of Hydrangea will not bloom this year. Try to keep the branches strong. Water huaduo No.1 or Hydrangea nutrition solution once a month in autumn. Keep it indoors in winter. Move it out in March April next year. Wait for flowers to bloom.~
After summer, the bougainvillea will also slowly bloom without leaves. If you want to turn your family into a sea of bougainvillea, just cut more.
1. It's better to choose the lignified branch of Prunus deltoides. After cutting, it will bloom this year or next spring, and the seedlings will grow fast.
Cut the branches to 10-20cm long, keep 1-2 leaves, soak in carbendazim for 20-30min first to avoid bacterial infection during cutting.
2. It is suitable for cutting with coconut bran soil. Ordinary coconut brick can be used. It must be soaked with boiling water to kill bacteria. It can be used when it is cool and becomes slightly wet.
3. Because the pole of the triangle plum is a little big, we need to use a more stable pot to cut, black and white square is OK, because the coconut brick soil has humidity, after cutting, we don't need to water, we must put it in a more ventilated position.~
4. Prunus deltoides is also easy to cut. Ventilation is the key. If you feel the color of coconut soil becomes lighter and then spray it wet, you will find new leaves emerging in 1-2 weeks. At this time, don't move around and bask in the sun properly.
5. After cutting for 20-30 days, you can carefully pull out a Bougainvillea to see if it takes root. If the root system is obvious, you can consider transplanting it into a small basin of 1 gallon.
6. Transplanting of Prunus deltoides is very important. It's better not to use too large basin for cutting seedlings, because the basin should conform to the size of root system. One gallon is enough. Coconut brick + nutritious soil are used for soil. After planting, the basin will be slow for 3-5 days, and then the sun will slowly shine.
7. For the maintenance of cutting seedlings of Prunus deltoides, attention should be paid to strengthen the light and avoid excessive growth. Do not water too much at ordinary times. Apply fertilizer regularly. Use huaduo No.1 to strengthen roots and promote leaves. Use huaduo No.2 to accelerate flowers. This year's cutting seedlings may blossom next year.
Almost everyone loves rose flowers. Even if there is no yard, there is a heart for growing rose. Now is a good time for Rose cutting. It will blossom next spring.~
1. Prepare a few mud tiles (you can buy both fresh flower shop and some treasure) and wet them with water.
2. Cut the mud into small pieces, and put the rose branches (sterilized with carbendazim in advance) in the middle of the mud.
3. Put it in a cool place in the room, don't bask in the sun, pour a little water into the tray, don't pour too much, keep it moist.
4. In about 10-20 days, the root system of rose will penetrate the mud. When it can be seen clearly, transplanting can be considered.
You don't need to remove the flower mud, just pick up the extra one a little. You can plant the flower mud together.
5. Transplanting into a small square basin, do not use too large basin (it is not easy to water), with soil as nutrient soil: vermiculite = 5:1. After transplanting, first put the cool windowsill to slow the roots, and then slowly bask in the sun 3-5 days later.
6. After growing up, young seedlings should be exposed to the sun and fed in time. In autumn and winter, AOLV slow-release fertilizer and huaduo No.1 should be used as the main fertilizer, once a month to ensure strong seedlings. Cutting single branch can be slightly pruned to promote the development of new branches.
PS: if there is no flower mud, you can also use clean vermiculite or perlite for cutting. Be sure to keep the cutting process clean, use carbendazim for disinfection, avoid black stick, and the success rate of cutting is greatly increased.
Seeing the weather getting cold, is your Christmas Cactus army ready? If you don't have any flower friends at home, you can quickly use your leaves to cut and graft more trees. In winter, you can see the Christmas Cactus tower.
Hua You's "camel gardener" family has grafted more than ten pots of crabs. When winter comes, everyone should move quickly.~
1. Pick some Christmas Cactus leaves. It's better to be thicker. The thin and red ones are less nutritious, and the cutting strength is not enough. Leave the leaves to dry for 1-2 hours.
2. Prepare coconut bran soil (coconut brick soil), mix some perlite, scald it with boiling water and cool it, then insert the leaves of crabmail and put them in the corner of the room to avoid direct sunlight.
3. In the cutting process, wet the coconut bran soil after the color becomes light (dry). Do not water it too often to prevent the leaves from rotting. Leaves take root in about 15-20 days.
If flower friends find it difficult to insert soil, they can clip the crab leaves onto the comb, put the comb flat on the water bowl, with the bottom of the leaves facing the water surface, and immerse it in the water for 1-3 mm, so that hydroponics can take root faster.
4. Although the success rate of Christmas Cactus cutting is high, the subsequent growth is relatively slow. It is better to graft it on cactus, cactus column, leaf fairy and triangular column. The blade used should be sharp and clean. First, thin the bottom of crab leaf.
You can see the white stem in the middle of the bottom.
Then find the formation layer of cactus, and never graft it into the middle leaf pith.
At the position of the cambium, make a cut with a blade, insert the leaves and fix them with a toothpick.
Do not water immediately after grafting, wait 7-10 days to water again, do not casually break, the crab leaf spirit shows success, usually watering should not be too much, as long as the cactus below is not watered to death.
Now the jasmine is almost finished. It's suitable for pruning and cutting. After all, jasmine is most afraid of cold. It's also excellent to cut several pots for backup.
1. The cut branches of jasmine, whether old or young or not, can be used for cutting, cut into small sections, each section has a pair of leaves on it (cut half of the leaves if the leaves are too large).
2. The cuttage of jasmine is suitable to use sand and pure vermiculite, wet with multi fungus water in advance, and then insert the branches of jasmine.
3. Note that Jasmine likes heat and humidity. The weather in the north is cool in the morning and evening. You can cover it with film and open it for ventilation at noon. During the cutting process, pay attention to high temperature and moisture, but do not stuffy, the surrounding environment should be ventilated.
4. The roots of Jasmine are very fast. It takes about 2 weeks to root. It's ready to be transplanted into a small flowerpot.
5. For the transplanted jasmine, in addition to the first 3-5 days of slow basin, sufficient light should be kept behind, and the long leaves should be cut properly to promote the development of new branches. When it's raining, pour some rain, sprinkle some slow-release fertilizer, and keep strong before winter.
Gardenia Flower lovers can also prepare cutting now. Both new and old branches of Gardenia can be cutted, and they are easy to take root.
Take a look at gardenias cut by Huayou. They become big households in a second. They are all old ones.
1. Trim the Gardenia branches with sharp scissors or garden knives. Cut them with one knife instead of roughening them.
2, find a piece of foam board, poke holes, stick branches in small holes, float in the basin.
3. Gardenia root fastest by hydroponics. When the root grows to 3-5 roots, soil transfer can be considered.
4. Gardenia water soil transfer is the key. Particles and soil can be added into the water gradually, which can be filled up in 2-3 times and half a month, so that gardenia can slowly adapt to the soil culture environment.
5. Gardenias adapted to soil culture can be replaced by pure soil culture again. Remember to water the gardenias with acid nutrient solution once or twice a month to make them grow stronger.
Cutting skills can't be separated from their families. In summary, most of the flower cutting can be operated according to the following picture. Flower friends can draw inferences from one example.
