ThePlantAide.com

Breeding methods and precautions of Aralia

Marie Schrader
2020-06-30 16:21:23
Soil: the growth of Yalong wood needs fertile soil, which can be mixed with rural soil and sandy soil. Light: this kind of plant grows well in a sunny environment. If the light is poor, it should be exposed to sunlight at regular intervals. Temperature: the most suitable growth environment for the plant is between 22 and 28 degrees. If the temperature is below 15 degrees, it needs to keep warm. Moisture: it likes to wet the environment, so it needs to ensure sufficient moisture when breeding.

I. maintenance method

1. Soil: Yalong prefers loose and fertile soil, which can be mixed with garden soil, saprophytic soil and sandy soil, which can provide a lot of nutrients for plant growth. This kind of plant has a high demand for soil porosity, so it is necessary to turn the soil in time, once a month, to ensure good air permeability of the soil.

2. Light: yalongmu likes direct sunlight, but it can also grow in dark and humid environment. But also note that if you don't see the sun for a long time, the color of the leaves will become lighter, so you need to let them receive the sunshine every other period of time.

3. Temperature: the suitable living environment of Yalong wood is between 20 and 28 degrees, which is why the temperature from May to July is very suitable for its growth and the most vigorous season. Winter temperature is less than 15 degrees, need to move into the indoor breeding, to prevent it from the damage of outdoor frost

4. Moisture: Yalong wood is suitable for growing in a warm and humid environment, so it needs a lot of moisture, so it is necessary to ensure that there is a lot of moisture to support its growth.

2. Cultivation techniques

1. Cutting: select the robust branches of more than two years, about 10 cm to 20 cm, and select the season with the most vigorous plant growth in May and June. After selecting branches, cut the base of cuttings into a flat mouth with a knife, wash the juice with clear water, and then put it in the shade to dry for a period of time.

2. Reproduction: make a circular cutting at the stem of Yalong wood, and cut about 1.8-2.2cm. And out of the cortex. Then daub the incision with NAA aqueous solution. Finally, cover the blade and water a lot. Tie the film tightly and place it outdoors so that it is fully exposed to the sun. About a month, to check whether the water is sufficient at any time, timely replenishment of water. After a month, new roots will grow in the cutting area.

Yalong wood

1. Diseases and insect pests: Asian Dragon wood is vulnerable to the damage of red spider. The red spider makes webs on the back of the plant, sucks the juice of the plant, and the color of the leaves will be light, even wilt, and finally fall off. Can be captured manually, can also use chemical drugs for prevention and treatment, in the early stage of the disease very good treatment.

2. Yellow leaves: because the growth of Yalong requires a lot of sufficient light, if the sun is not enough, it will not be able to breathe, which will lead to discoloration of the leaves. Therefore, it is necessary to see the light frequently. You can put it on the balcony. The light and air are sufficient.

Yalong wood

4. Other issues

1. Whether it can be raised at home: Yalong wood likes warm and humid environment, and the place with high temperature is suitable for its growth. It can be raised indoors, with the function of purifying air and decorating the room.

2. Whether to send people: the ornamental value of the Asian dragon tree is very high. Fengshui also says that planting the Asian dragon tree can increase good luck, make people prosperous, healthy and long-lived, and is suitable for sending people.

Ya Long Mu

The Plant Aide - Plant experts around you

The Plant Aide - Plant experts around you

www.theplantaide.com